lemonsoli.blogg.se - Fluke 1507

#Fluke 1507 full#

Webinar: Facilities Maintenance with Fluke Filter for variable-speed motor drive measurements. Also useful for users who are required to perform earth-bond continuity measurements during installation testing.Ģ. Function useful for checking connections and motor windings. For more complete information, see individual product data sheets.ġ. Note: Not all product features and specifications are listed in this table. Inhibit test if terminal voltage > 30 V prior to initialization of testġ000 V: ±(3% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩĬlick here for complete specifications on the Fluke 1507-KIT2 Audible (buzzer) and visual (LED) indicatorsįluke 1507-KIT2 Specifications AC/DC Voltage Specificationsĭischarge time 30 V prior to initialization of test.Double insulated housing for increased safety.Suitable for receptacles or against insulated wire.The R5110 features two voltage ranges allowing it to detect both high (90 to 1000V) and low (24 to 1000V) AC voltage wiring. This Voltage Detector has the ability to detect the presence of AC voltage from a safe distance. REED R5110 Non-Contact Voltage Detector with Flashlight Low battery indication and auto shut off.Built-in laser pointer identifies target area.The R2300 is an affordable non-contact measurement solution able to quickly and efficiently measure the temperature of hot, hazardous or hard-to reach objects from a safe distance.

This infrared thermometer features a 12:1 distance to spot ratio and is capable of measuring temperatures up to 752☏ (400☌).

Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests.

Features CAT IV 600 V over voltage category rating.

Presents results on a large, backlit display.

Saves battery power with auto power off.

Simplifies repetitive or hard-to-reach testing with the remote test probe.

Provides lo-ohms earth-bond continuity (200 mA).

Measures AC/DC voltage from 0.1 to 600 V and resistance from 0.01 Ω to 20.00 kΩ.

Includes auto-discharge of capacitive voltage for added user protection.

Includes live circuit detection to prevent insulation test if voltage >30 V is detected.

Performs insulation tests from 0.01 MΩ to 2.0 GΩ.

Offers multiple insulation test voltages: 50, 100, 250, 500, and 1000 V.

Makes repetitive tests simple and easy with a compare (pass/fail) function.

Automatically calculates polarization index and dielectric absorption ratio.

Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians.Additional features, like the remote probe, save both time and money, especially when performing repetitive tests. Its handy size and lightweight make it easy to pack and use.

#Fluke 1507 full#

Take advantage of the full feature set to easily and quickly perform advanced insulation resistance testing. Additionally, the multiple test voltages facilitate the tool for many troubleshooting, commissioning, and preventative maintenance applications. Maximum capacitive load: operable with up to 1 ♟ load.ġ000 V ±(1.5% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩ.Ideal for advanced industrial and electrical insulation testing, this insulation tester comes in a compact design and features versatility. Test voltage: 50 V, 100 V, 250 V, 500 V, 1000 V.Īuto discharge: discharge time 30 V prior to initialization of test. Open circuit test voltage: > 4.0 V, 200.0 mA. Input impedance: 3 MΩ (nominal), 60 dB at DC, 50 or 60 Hz. It has live circuit detection that prevents insulation test if voltage > 30 V is detected for added user protection.Īccuracy: 50 Hz to 400 Hz ± (% of Rdg + Digits). The Fluke 1507 insulation resistance tester features an insulation test range from 0.01 MΩ to 10 GΩ and insulation test voltages of 50 V, 100 V, 250 V, 500 V, 1000 V.